UK cases are built to take anything, because anything can happen. They are relied upon to protect valuable equipment under the most difficult conditions. A must for virtually any portable equipment, test instrumentation, emergency gear, safety equipment, etc.O-ring seals keep all UK cases completely waterproof and airtight.

UK cases are incorporated into many products on an OEM basis, due to the ease with which the shell can be machined and attachments made through solventing welding. Accessory panel mounting rings are ideal for attaching instrument panels to the inside of the case. All cases are RoHS compliant for use in products shipped into the European Union.

The structurally reinforced ABS shell of a UK case will withstand repeated drops to concrete and will remain stronger under cold conditions than any other material used in injection molded cases.

Choose between padded fold-down handle or military standard spring-loaded metal handles; durable snap action plastic latches or military standard twist latches.

Features Make the Difference

Injection molded

The UK Dry Boxes, UltraCases™ and Loadout™ Cases formed from injection molded shells which fit together with a water tight, dust tight o-ring seal. They can be submerged to depths often exceeding 1 meter.

UK injection molded cases are made from high-impact ABS plastic

which is extremely tough and resists scratches, dents and corrosion. For modifications, ABS is machineable and can be solvent welded. UltraCases are normally available in Black. Yellow, Jet Grey and custom colors are available on a special order basis. Please inquire about pricing and lead time

The main seal of the injection molded cases is made from a
resilient blue silicone o-ring

and can easily withstand submersion in 1 meter meter of water as well as seal out dust and many corrosive gasses. All UltraCases include a pressure equalization valve built into the latch mechanism. When the latch is opened, pressure is equalized. Loadout Cases utilize an o-ring sealed screw down equalizer valve.

Stainless steel twist-lock latches and spring loaded handles are standard on Loadout Cases. They are designed to meet Mil Specs.

Pressure Equalizer resin latches and padded handles

are standard on UltraCases, They are designed for maximum corrosion protection and requirements for non-magnetic cases. Hinge pins and screws are 300 series stainless steel

Full width hinges

with a stainless steel pin are used on all cases in order to maintain the maximum seal if a case is dropped. The pin and lid can be removed on all transit cases.

User configured closed cell dice foam filling

is available with all cases. Sections of foam are easily removed to cradle delicate objects. Custom cut foam is also available.

Panel mounting rings are available in Dry Boxes and Dry Cases.

The ring is solvent welded in place 0.5 inch below the rim of the case. Brass threaded inserts (8-32) are embedded in the ring for rigid attachment of an instrument panel. A foamed neoprene O-ring seals the panel to the ring.

A glass fiber reinforced extendable handle

is a standard option for all transport cases. Because the handle is attached to the outside of the case, the sealed interior remains protected. The length of the handle is sufficient for tall people to pull the case comfortably.

Large 3 inch wheels

with stainless steel axles are used on Transport Cases for easier rolling on gravel surfaces or rough pavement. Curbs are no challenge

Price and Delivery

Underwater Kinetics Dry Boxes, UltraCases and Loadout Cases can be purchased from any authorized UK Distributor. Contact our master case distributors for information on ordering cases in quantity or to learn more about customization options.